D-Link DXS-3600-16S Manual page 550

included
excluded
Default
VIEW-NAME
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#snmp-server view interfacesMibView 1.3.6.1.2.1.2 included
DXS-3600-32S(config)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no snmp-server view interfacesMibView
DXS-3600-32S(config)#
55-7 snmp-server group
This command is used to create a new SNMP group entry that maps SNMP users to SNMP views. Use the no form of
this command to remove a specified SNMP group entry.
snmp-server group GROUP-NAME {v1 | v2c | v3 {auth | noauth | priv}} [read READ-VIEW] [write WRITE-
VIEW] [notify NOTIFY-VIEW]
no snmp-server group GROUP-NAME
Parameters
GROUP-NAME
v1
v2c
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies to configure the OID (and subtree OIDs) specified in OID-TREE
argument to be included in the SNMP view.
(Optional) Specifies to configure the OID (and subtree OIDs) specified in OID-TREE
argument to be explicitly excluded from the SNMP view.
There are eight VIEWs in the default as following:
OID-TREE
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
Global Configuration Mode.
Level: 12
You use this command to create a view for the MIB object trees.
The user will need to specify the view when they use the snmp-server group
command to define a user group.
This example shows how to set a MIB view to interfacesMibView.
This example shows how to set a MIB view of interfacesMibView to default value.
Specifies the name of the group. The valid length for GROUP-NAME is 1 to 32
characters. The syntax is general string that does not allow space.
Specifies that SNMPv1 (the least secure of the possible SNMP security models)
should be used for the group.
Specifies that SNMPv2c should be used for the group. The SNMPv2c security model
allows for the transmission of informs, and supports 64 character strings (instead of
32 character strings).
View Type
Included
Included
Included
Included
Included
Included
Excluded
Included
542