D-Link DXS-3600-16S Manual page 503

all
interface INTERFACE-ID [,
| -]
quene CP-INDEX [, | -]
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show qcn cp interface tenGigabitEthernet 1/0/1 queue 0
Interface Id
CP Index
Status
CP Priority
CP Identifier
MAC Address
Queue Set Point
Feedback Weight
Minimum Sample-Base
Minimum Header-Octets
DXS-3600-32S#
Example
DXS-3600-32S#show qcn cp counters interface tenGigabitEthernet 1/0/1 queue 0
Int. CP CP
Id Idx Pri Discarded Frames
---------- --- --- ------------------- ------------------- -------------------
TGi 1/0/1 1 N/A N/A
DXS-3600-32S#
49-10 show qcn cpid
This command is used to display the relationship between the CP identifier, interface, and CP index.
show qcn cpid CP-IDENTIFIER
Parameters
CP-IDENTIFIER
Default
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to display CP information for all interfaces.
Specifies the interface to show QCN CP information. Valid interfaces are physical
interfaces. You can specify multiple interfaces, which are separated by "," or "–". No
space before and after the comma or hyphen.
(Optional) Specifies the Congestion Point (CP) index to be displayed. The valid
Congestion Point index range is 1 to MAX_CP_INDEX. You can specify multiple
CPs, which are separated by "," or "–". No space before and after the comma or
hyphen. When the argument of cp-index is not selected, all CPs on the specified
interfaces will be displayed.
None.
EXEC Mode.
Level: 3.
Use this command to display the CP information for the specified interface(s). When
teh command show qcn cp is issued with the optional keyword counters, only the
active CPs will be showed.
This example shows how to display CP information for the interface Gi1.1 with the
CP index 1.
: TGi 1/0/1
: 1
: Inactive
: -
: 0036003201000140
: 00-36-00-32-01-00
: 26000
: 2
: 15000
: 0
This example shows how to display CP information for the interface Gi1.1 with the
CP index 1.
Transmitted Frames
N/A
Specifies 16 hexadecimal digits for the Congestion Point Identifier (CPID) to get the
corresponding interface ID and CP index.
None.
Transmitted CNMs
N/A
495