D-Link DXS-3600-16S Manual page 261

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

22-5 gvrp dynamic-vlan-creation
This command is used to enable dynamic VLAN creation, and use the no command to disable the dynamic VLAN
creation function.
gvrp dynamic-vlan-creation
no gvrp dynamic-vlan-creation
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#gvrp
DXS-3600-32S(config)#gvrp dynamic-vlan-creation
DXS-3600-32S(config)#
22-6 forbidden vlan
This command is used to specify a port as being a forbidden member of the specified VLAN. Use the no forbidden vlan
command to remove the port as a forbidden member of the specified VLAN.
forbidden vlan VLAN-ID [,|-]
no forbidden vlan [VLAN-ID [,|-]]
Parameters
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
By default, this option is disabled.
Global Configuration Mode.
Level: 12
When dynamic VLAN creation is enabled, if a port has learned a new VLAN
membership and the VLAN does not exist, the VLAN will be created automatically.
Otherwise, the newly learned VLAN will not be created.
This example shows how to enable dynamic VLAN creation with the GVRP protocol.
Specifies the VLAN ID used. The range is 2 to 4094. You can specify a single VLAN-
ID, a range of VLANs separated by a hyphen, or a series of VLANs separated by
comma. If no VLAN ID specified for the no command, all forbidden VLANs will be
removed.
None.
Interface Configuration Mode.
Level: 12
This command can be configured on physical ports or link aggregation groups.
As a forbidden port of a VLAN, a port is forbidden from becoming a member port of
the VLAN.
If the port is the VLAN member, setting a VLAN as its forbidden VLAN will lead to the
port is removed from the VLAN.
The VLAN specified by the command does not need to exist.
For the no command, if no VLAN is specified, then all forbidden VLANs will be
removed. If a VLAN is the port's allowed VLAN, removing the forbidden VLAN will
lead to the port re-added into the VLAN automatically.
253

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents