D-Link DXS-3600-16S Manual page 588

59-5 password
This command is used to create a password used on the line interface. The no form of this command will disable the
use of a password.
password {password | encrypted encrypted-password}
no password
Parameters
password
encrypted
encrypted-password
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#line console
DXS-3600-32S(config-line)#password 12345
DXS-3600-32S(config-line)#
59-6 login (Line)
This command is used to configure the line login method
login
no login
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S(config-line)#login
DXS-3600-32S(config-line)#
59-7 enable
This command is used to enter a privilege level.
enable [privilege-level]
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to identify the plain text password.
Specifies to identify that the password entered is encrypted.
Specifies the encrypted pasword password used. This password must be between 1
to 26 characters long. Leading spaces will be ignored and spaces in between or at
the end are regarded as part of the password.
By default, there is no password specified.
Line Configuration Mode.
Level: 15
None.
This example shows how to create a password of '12345'.
None.
By default, no login is configured.
Line Configuration Mode.
Level: 15
None.
This example shows how to use the line login command.
580