D-Link DXS-3600-16S Manual page 420

Usage Guideline
Example
DXS-3600-32S#debug ip ospf route
DXS-3600-32S#
Add an OSPF route level 1 dst 172.18.1.1 mask 255.255.255.0
40-42 debug ip ospf redistribution
This command is used to turn on the OSPF redistribution debug switch. Use the no form of the command to turn off the
OSPF redistribution debug switch.
debug ip ospf redistribution
no debug ip ospf redistribution
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf redistribution
DXS-3600-32S#
Import AS external route from src 5 net 192.1.1.1
10.1.1.100 tic 500
40-43 debug ip ospf show counter
This command is used to display the OSPF statistic counter.
debug ip ospf show counter [packet | neighbor | spf]
Parameters
packet
neighbor
spf
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Use this command to turn on or turn off OSPF route debug switch. When one OSPF
route is added, updated or deleted, the debug information will be print if OSPF debug
function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF route debug switch.
None.
By default, the OSPF redistribution switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF redistribution debug switch. When one
route of other protocol is redistributed into OSPF or not redistributed into OSPF any
more, the debug information will be print if OSPF debug function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF redistribution debug switch.
Specifies to display the OSPF packet counter.
Specifies to display the OSPF neighbor counter.
Specifies to display the OSPF SPF event counter.
None.
Privileged EXEC Mode.
nh cnt 1 cost 10 cost2: 0 tic: 300
mask 255.255.255.0 type 2 cost 50 fwd
412