Show Lldp Interface - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show lldp management-address ipv4 192.168.254.10
The following is sample Address 1
-----------------------------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
DXS-3600-32S#
Example
DXS-3600-32S#show lldp management-address
Address 1 :
------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Total Entries : 1
DXS-3600-32S#

32-17 show lldp interface

This command is used to display the LLDP of each physical interface configuration for advertisement options.
show lldp interface interface-id [, | -]
Parameters
interface interface-id
,
-
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output from the show lldp management-address ipv4
command. To display a specific management address information.
: IPV4
: 192.168.254.10
: IfIndex
: 1.3.6.1.4.1.171.10.127.1
: 1/0/1-1/0/5
This example shows how to display all management address information.
: IPv4
: 192.168.254.10
: IfIndex
: 1.3.6.1.4.1.171.10.127.1
:
Specifies the valid physicla interface.
(Optional) Specifies a series of physical interfaces. No space before and after the
comma.
(Optional) Specifies a range of physical interfaces. No space before and after the
hyphen.
None.
User EXEC Mode.
Level: 3
This command displays the LLDP of each physical interface configuration for
advertisement options.
320