Show Aliases - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Related
commands
1.3

show aliases

To display all the command aliases or aliases in special command modes, run
the show aliases command in the privileged EXEC mode.
show aliases [mode]
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Chapter 1 CLI Authorization Configuration Commands
<cr>
You can use the key word all to attribute all sub-commands
of reload to level-1 users:
DES-7200(config)# privilege exec all level 1 reload
After the above setting, you can access the CLI window as
level-1 user to use all sub commands of the reload
command:
DES-7200>reload ?
LINE Reason for reload
at
cancel
in
<cr>
Command Description
enable secret
Set CLI-level password
Parameter Description
mode Mode of the command represented by
the alias.
N/A.
EXEC mode.
Show all the configuration of aliases if the command mode
has not been input.
Following example shows the command alias in the EXEC
mode:
DES-7200#show aliases exec
.
reload at a specific time/date
cancel pending reload scheme
reload after a time inte
rval
1-5