Show Ip Dvmrp Route - D-Link DXS-3600-16S Manual

Display Parameters
Generation ID
Expire Time

15-5 show ip dvmrp route

This command is used to display the DVMRP route info.
show ip dvmrp route [IPADDRESS MASK]
Parameters
IPADDRESS
MASK
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip dvmrp route
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor
---------------------
2.0.0.0/8
10.0.0.0/8
Total Entries: 2
DXS-3600-32S#
Example
DXS-3600-32S#show ip dvmrp route 10.3.3.3 255.0.0.0
DVMRP Routing Table
Source Address/Netmask
-------------------------
10.0.0.0/8
Total Entries: 1
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Specify the generation ID of the neighbor. This value is dynamically generated by the
neighbor switch, and it is used for the local switch to detect that whether the
neighbor has restarted or not
After this time, the neighbor will be aged out if no new probe message received from
the neighbor.
Specifies IP address. Together with the parameter MASK, specify displaying the
route info for the specified network.
Specifies the mask of the IP address.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to display route information learned by DVMRP. If no
parameter added, this command will display all the route information on the switch.
This example shows how to display all the route information learned by DVMRP.
-----------------
10.90.90.90
10.90.90.2
This example shows how to display routing information of 10.3.3.3 and mask
255.0.0.0
Upstream Neighbor
-----------------
10.90.90.2
Metric Learned Interface
------ ------- ------------ ------
2 Dynamic vlan1
1 Local vlan1
Metric Learned
------ -------
1 Local
223
Expire
00:01:22
-
Interface Expire
----------- ------
vlan1 -