D-Link DXS-3600-16S Manual page 149

Display Parameters
Next Hop Self
Description
Password
Peer
Address Family IPv4 Unicast Indicates that the configuration below is only for IPv4 unicast address family.
IPv4 Unicast
None
Advertised (IPv4 Unicast)
Received (IPv4 Unicast)
Address Family VPNv4
Unicast
VPNv4 Unicast
None (VPNv4 Unicast)
Advertised (VPNv4 Unicast)
Received (VPNv4 Unicast)
AS Override
Site-of-Origin
Next Hop Self
Remove Private As
AllowAS In
Num (AllowAS in)
Soft Reconfiguration
Inbound
Send Community
None (send community)
Standard (send community)
Extended (send community) The local BGP send extended community attributes to the neighbor.
Both Standard and Extended The local BGP send both standard and extended community attributes to the
Default Originate
Route Map (Default
Originate)
Incoming Update Prefix List
Outgoing Update Prefix List
Incoming Update Filter List
Outgoing Update Filter List
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Indicates whether the local BGP enable the router as the next hop for the neighbor.
Show the description configured to describe the neighbor.
Show the password set on the TCP connection to the neighbor.
Group Indicates which peer group the neighbor belongs to.
Indicates whether the local BGP enable the exchange of information with a Border
Gateway Protocol (BGP) neighbor in IPv4 unicast address family.
(IPv4 Unicast) Indicates that the local BGP does not exchange IPv4 unicast
information with the neighbor.
Indicates that the local BGP advertise its IPv4 unicast information to the neighbor.
Indicates that the local BGP receive the IPv4 unicast information from the neighbor.
Indicates that the configuration below is only for VPNv4 unicast address family.
Indicates whether the local BGP enable the exchange of information with a Border
Gateway Protocol (BGP) neighbor in VPNv4 unicast address family.
Indicates that the local BGP does not exchange VPNv4 unicast information with the
neighbor.
Indicates that the local BGP advertise its VPNv4 unicast information to the neighbor.
Indicates that the local BGP receive the VPNv4 unicast information from the
neighbor.
Indicates whether the local BGP override the AS number of the peer with its own AS
number in the routes received from the peer.
Indicates the Site-of-Origin value configured to the neighbor.
Indicates whether the local BGP enable the router as the next hop for the neighbor.
Indicates whether the configuration of removing the private AS from the AS path
attribute in the updates sent to the neighbor is enabled or not.
Indicates whether the local BGP allow its own AS number appearing in the received
BGP update packets from the neighbor.
Indicates how many times that the local BGP allow its own AS number appearing in
the received BGP update packets. This field is only display when the AllowAS In is
enabled.
Indicates whether the local BGP store the route updates received from neighbor.
Indicates whether the local BGP send its community attributes to the neighbor.
The local BGP doesn't send any community attributes to the neighbor.
The local BGP send standard community attributes to the neighbor.
neighbor.
Indicates whether the local BGP send the default route to the neighbor.
Indicates a route-map name which control in which condition the local BGP send the
default route to the neighbor.
Indicates an IP prefix list name which the route updates received from the neighbor
must be applied.
Indicates an IP prefix list name which the route updates sent to the neighbor must be
applied.
Indicates an AS path access list name which the route updates received from the
neighbor must be applied.
Indicates an AS path access list name which the route updates sent to the neighbor
must be applied.
141