Show Ip Bgp Community - D-Link DXS-3600-16S Manual

Display Parameters
Metric
LocPrf
Weight
Path

7-74 show ip bgp community

This command is used to display routes which are matching the community.
show ip bgp community [{all | rd ASN:NN | vrf VRF-NAME}] COMMUNITY [exact-match]
Parameters
all
rd ASN:NN
vrf VRF-NAME
COMMUNITY
exact-match
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp community local-as
BGP Local Router ID is 10.90.90.90
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask
*>10.10.10.0/24
*>10.10.20.0/24
*>10.20.10.0/24
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
If shown, this is the value of the inter-autonomous system metric. This field is
frequently not used.
Local preference value as set with the set local-preference route-map configuration
command. The default value is 100.
Weight of the route as set via autonomous system filters.
Autonomous system paths to the destination network.
(Optional) Specifies to display routes of all VPN and VRFs.
(Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Specifies a community, in the form of <as-number> : <udn-number> or any of the
following predefined values: internet, no-export, local-as, no-advertise. A
community string can be formed by multiple communities, separated by a comma.
For example, a community string is 200:1024, 300:1025, 400:1026.
(Optional) If specified, communities need to match exactly.
If not specified, then there are two cases:
1. If internet is contained in the community list, then all routes will match.
2. If not, then the community needs to be a subset of route's community to match.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to display the routes which match the community specified.
When using this command with the 'exact-match' parameter, only the routes of which
the community attribute exactly matches will be displayed.
This example shows the output from the show ip bgp community command in,
privileged mode.
Gateway
172.16.10.1
172.16.10.1
172.16.10.1
Metric LocPrf
0 300
0 300
0 300
128
Weight Path
10 i
10 i
10 i