D-Link DXS-3600-16S Manual page 153

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Display Parameters
Origin codes
IP Address/Netmask
Gateway
Metric
LocPrf
Weight
Path
Example
DXS-3600-32S#show ip bgp neighbors 10.1.1.2 statistics
BGP neighbor: 10.1.1.2 (External Peer)
-----------------------------------------------
Accepted Prefixes
Last read
Send Statistics
Opens
Notifications
Updates
Keepalives
Route Refresh
Total
Receive Statistics
Opens
Notifications
Updates
Keepalives
Route Refresh
Total
Connections Established
Connections Dropped
Local Host
Local Port
Remote Host
Remote Port
Due Time for Next Start Timer
Due Time for Next Connect Timer : 0 seconds
DXS-3600-32S#
Display Parameters
BGP neighbor
Internal Peer
External Peer
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Origin of the table entry displayed at the end of each line. It can be one of the
following values:
i - Entry originated from an Interior Gateway Protocol (IGP) and was advertised
with a network router configuration command.
e - Entry originated from an Exterior Gateway Protocol (EGP).
? - Origin of the path is not clear. Usually, this is a router that is redistributed into
BGP from an IGP.
IP prefix with its mask length of the entry.
IP address of the next router that is used when forwarding a packet to the destination
network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to
this network.
If shown, this is the value of the inter-autonomous system metric. This field is
frequently not used.
Local preference value as set with the set local-preference route-map configuration
command. The default value is 100.
Weight of the route as set via autonomous system filters.
Autonomous system paths to the destination network.
This example shows how to display the statistical information between 10.1.1.2 and
10.10.0.2.
: 3
: 00:00:47
: 1
: 0
: 1
: 26
: 0
: 28
: 1
: 0
: 1
: 25
: 0
: 27
: 1
: 0
: 10.10.0.2
: 1024
: 10.1.1.2
: 179
: 5 seconds
Description
IP address of the BGP neighbor.
Indicates that the neighbor is internal.
Indicates that the neighbor is external.
145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents