D-Link DXS-3600-16S Manual page 171

7-99 debug ip bgp prefix-list
This command is used to turn on BGP IP prefix list debug switch. Use the no form of this command to turn off BGP IP
prefix list debug switch.
debug ip bgp prefix-list
no debug ip bgp prefix-list
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp prefix-list
DXS-3600-32S#
7-100 debug ip bgp show global
This command is used to show internal detailed information about BGP.
debug ip bgp show global [{vrf VRF-NAME | vpnv4}]
Parameters
vrf VRF-NAME
vpnv4
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
By default BGP IP prefix list debug switch is turned off.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on BGP IP prefix list debug switch. When IP prefix list is
matching BGP information, debug information will be print if BGP debug function is
turned on.
Use the command debug ip bgp to turn on BGP debug function.
This example shows how to turn on BGP IP prefix list debug switch.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Displays the global parameters in the address family of VPNv4
None.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to check internal status and detailed information of BGP.
163