D-Link DXS-3600-16S Manual page 217

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Parameters
hardware-address
type
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp pool pool1
DXS-3600-32S(dhcp-config)#hardware-address 00d0.f838.bf3d
DXS-3600-32S(dhcp-config)#
14-8 host
This command is used to define the IP address and network mask of the DHCP client host in the DHCP address pool
configuration mode. The no form of this command can be used to delete the definition of the IP address and network
mask for the DHCP client.
host ip-address [netmask]
no host
Parameters
ip-address
netmask
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp pool pool1
DXS-3600-32S(dhcp-config)#host 192.168.12.91 255.255.255.240
DXS-3600-32S(dhcp-config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to define the MAC address of the DHCP client.
Specifies the hardware platform protocol of the DHCP client. Use the string definition
or digits definition.
String option:
• Ethernet
• ieee802
Digits option:
• 1 (10M Ethernet)
• 6 (IEEE 802)
No hardware address is defined by default. If there is no option when the hardware
address is defined, it is the Ethernet by default.
DHCP Address Pool Configuration Mode.
Level: 8
This command can be used only when the DHCP is defined by manual binding.
This example shows how to define the MAC address 00d0.f838.bf3d with the type
ethernet.
Specifies to the IP address of the DHCP client.
Specifies to define the network mask of DHCP client.
No IP address or network mask of the host is defined.
DHCP Address Pool Configuration Mode.
Level: 8
If the network mask is not defined definitely, the DHCP server will use the natural
network mask of this IP address: 255.0.0.0 for class A IP address, 255.255.0 for
class B IP address, and 255.255.255.0 for class C IP address.
This command can be used only when the DHCP is defined by manual binding.
This example shows how to set the client IP address as 192.168.12.91 and the
network mask as 255.255.255.240.
209

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents