D-Link DXS-3600-16S Manual page 92

Usage Guideline
Example
DXS-3600-32S#clear ip bgp flap-statistics 192.168.1.0/24
DXS-3600-32S#
7-29 clear ip bgp flap-statistics vrf
This command is used to clear BGP route dampening flap statistics of IPv4 VRF address family sessions.
clear ip bgp flap-statistics vrf VRF-NAME [{IP-ADDRESS | NETWORK-ADDRESS}]
Parameters
vrf VRF-NAME
IP-ADDRESS
NETWORK-ADDRESS
N/A
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#clear ip bgp flap-statistics vrf VPN-A 192.168.1.0/24
DXS-3600-32S#
7-30 clear ip bgp peer-group
This command is used to reset Border Gateway Protocol (BGP) connections using hard or soft reconfiguration for all
the members of the BGP peer group.
clear ip bgp peer-group [{vrf VRF-NAME | vpnv4}] PEER-GROUP-NAME [soft [{in [prefix-filter] | out}]]
Parameters
vrf VRF-NAME
vpnv4
PEER-GROUP-NAME
soft
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command is used to clear the accumulated penalties for routes that have been
received on a router which has BGP dampening enabled. If no arguments or
keywords are specified, the flap statistics are cleared for all routes.
This example shows how to clear the route dampening flap statistics of network
192.168.1.0/24.
Specifies the VRF name.
(Optional) Specifies to only clear dampening flap statistics of the route matching the
IP address.
(Optional) Specifies to only clear dampening flap statistics of the route matching the
network address.
Specifies to clear dampening flap statistics of all routes.
None.
Privileged Mode.
Level: 8. (EI Mode Only Command)
This command is used to clear the accumulated penalties for routes that have been
received on a router which has BGP dampening enabled of IPv4 VRF address family
sessions. If no keyword is specified, flap statistics of all routes in IPv4 VRF address
family will be cleared.
This example shows how to clear the route dampening flap statistics of network
192.168.1.0/24 which in IPv4 VRF address family.
(Optional) Specifies a VRF name. The length of VRF-NAME is 12 characters.
(Optional) Specifies to reset the sessions of the VPNv4 address family.
Specifies the peer group name. The maximum length is 16 characters.
(Optional) Specifies to initiate a soft reset. This function does not tear down the
session. If the soft keyword is not specified, all the sessions of the members of the
peer group will reset.
84