Show Vlan Filter - D-Link DXS-3600-16S Manual

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show vlan access-map
VLAN access-map vlan-map 10
match ip access list:
action: forward
VLAN access-map vlan-map 20
match mac access list:
action: redirect tenGigabitEthernet 1/0/5
DXS-3600-32S#

3-28 show vlan filter

This command is used to display the VLAN filter configuration of the interface.
show vlan filter [{access_map map_name | vlan vlan_id}]
Parameters
access_map map_name
vlan vlan_id
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show vlan filter
VLAN Map aa
Configured on VLANs: 5-127,221-333
VLAN Map bb
Configured on VLANs: 1111-1222
DXS-3600-32S#show vlan filter vlan 5
VLAN ID 5
Binding VLAN Map aa
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
EXEC Mode.
Level: 1
None.
This example shows how to display the VLAN access map.
110,220,stp_ip1,30,stp_ip2,
6710,6720,ext_mac,7760,
Specifies the name of the hostmap to be configured. The name can be up to 32
characters long.
Specifies the VLAN ID used.
None.
EXEC Mode.
Level: 1
None.
This example shows how to display the VLAN filter.
39