D-Link DXS-3600-16S Manual page 236

17-3 ip host
This command is used to configure the mapping of the host name and the IP address by manual. Use the no form of
the command to remove the host list.
ip host [vrf <string 1-12>] host-name ip-address
no ip host [vrf <string 1-12>] host-name ip-address
Parameters
vrf <string 1-12>
host-name
ip-address
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip host www.abc.com 192.168.5.243
DXS-3600-32S(config)#
17-4 clear host
This command is used to clear the dynamically learned host name in the privileged user mode.
clear host [vrf <string 1-12>] [host-name]
Parameters
vrf <string 1-12>
host-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#clear host www.abc.com
DXS-3600-32S#
17-5 show hosts
This command is used to display the DNS configuration.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the VRF that the host reside in. If no VRF name specified, the global
instance will be used.
Specifies the host name of the equipment.
Specifies the IP address of the equipment.
None.
Global Configuration Mode.
Level: 8
To delete the host list, use the no ip host host-name ip-address command.
This example shows how to configure the mapping of the host name 'www.abc.com'
and the IP address 192.168.5.243.
Specifies the VRF that the host reside in. If no VRF name specified, the global
instance will be used.
Specifies to delete the dynamically learned host.
None.
Privileged Mode.
Level: 2
Execute this command to delete the host name records learned by the DNS
dynamically.
This example shows how to delete the dynamically learned mapping records from
the host name-IP address buffer table.
228