D-Link DXS-3600-16S Manual page 418

Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf packet-transmitting
DXS-3600-32S#
Send out a Hello on interface 10.1.1.1 dst 255.0.0.5 tic 200
Send out a Hello on interface 100.1.1.1 dst 255.0.0.5 tic 220
40-38 debug ip ospf spf
This command is used to turn on the OSPF SPF calculation debug switch. Use the no form of the command to turn off
the OSPF SPF calculation debug switch.
debug ip ospf spf
no debug ip ospf spf
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf spf
DXS-3600-32S#
Running SPF-intra for area 0.0.0.0 tic 300
SPF-intra calculation completed tic 310
40-39 debug ip ospf timer
This command is used to turn on the OSPF timer debug switch. Use the no form of the command to turn off the OSPF
timer debug switch.
debug ip ospf timer
no debug ip ospf timer
Parameters
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF packet transmitting debug switch.
When one OSPF protocol packet is sent out, the debug information will be print if
OSPF debug function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF packet transmitting debug switch.
None.
By default, the OSPF SPF calculation switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF SPF calculation debug switch. When
one SFP calculation is processing, the debug information will be print if OSPF debug
function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF SPF calculation debug switch.
None.
By default, the OSPF timer switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
410