D-Link DXS-3600-16S Manual page 225

Example
DXS-3600-32S#show ip dhcp binding
IP Address Hardware Address
------------ ----------------
192.168.12.91 00-D0-F8-38-BF-3D Infinite
Total Entries: 1
DXS-3600-32S#
Display Parameters
IP Address
Hardware Address
Lifetime
Type
VRF
14-21 show ip dhcp conflict
This command is used to show the conflict history record of DHCP server.
show ip dhcp conflict [vrf vrf-name]
Parameters
vrf vrf-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip dhcp conflict
IP Address
------------
192.168.12.1
Total Entries: 0
DXS-3600-32S#
Display Parameters
IP Address
Detection Method
Detection Time
VRF
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to the result of the show ip dhcp binding command.
Lifetime
----------- ----------
Description
The IP address to be assigned to the DHCP client.
The hardware address of the DHCP client.
The expiration date of the lease. The Infinite indicates it is not limited by the time.
The type of the address binding. The Automatic indicates an IP address is assigned
automatically, and the Manual indicates an IP address is assigned by manual.
VRFs configured on the DHCP server.
(Optional) Specifies the name of a VRF instance.
None.
Privileged Mode.
Level: 2
This command can show the conflict address list and excluded address list detected
by the DHCP server.
This example shows the output result of the show ip dhcp conflict command.
Detection Method
----------------
Ping
Description
The IP addresses which cannot be assigned to the DHCP client.
The conflict detection method.
The conflict detection time.
VRFs configured on the DHCP server.
Type
Manual
Detection Time
----------------
2011/12/16 17:06:59
217