Set Community - D-Link DXS-3600-16S Manual

Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#route-map rmap1 permit 10
DXS-3600-32S(config-route-map)#match route-type internal
DXS-3600-32S(config-route-map)#
53-11 set as-path prepend
This command is used to add a set command to modify an autonomous system path of BGP routes. Use the no form of
this command to delete this set command.
set as-path prepend ASPATH-LIST
no set as-path prepend
Parameters
ASPATH-LIST
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#route-map mapaspath permit 10
DXS-3600-32S(config-route-map)#set as-path prepend 1,10,100,200
DXS-3600-32S(config-route-map)#

53-12 set community

This command is used to add a set command to modify the BGP communities attribute. Use the no form of this
command to delete this set command.
set community [COMMUNITY-SET | internet | local-as | no-advertise | no-export](1) [additive]
no set community
Parameters
COMMUNITY-SET
internet
local-as
no-advertise
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
All types of routes, internal, external, type-1 and type-2, are only for OSPF.
You can verify your settings by entering the show route-map command.
This example shows how to add a match command to match the metric of routes.
Specifies the path list to be appended before the autonomous system path of the
route. It could be an AS number or a list of AS numbers separated by comma.
None.
Route Map Configuration Mode.
Level: 8. (EI Mode Only Command)
Use this command to change the length of the autonomous system path of BGP
route. This can affect the best path selection.
You can verify your settings by entering the show route-map command.
This example shows how to add a set command to append an autonomous system
path list to BGP routes.
(Optional) Specifies a 32-bits integer number represented by AA:NN, where AA (AS
number) is the upper part of the word and NN (community number, user-specified) is
the lower part of the word
(Optional) Specifies routes to be advertised to all peers (internal and external)
(Optional) Specifies routes not to be advertised to external BGP peers.
(Optional) Specifies routes not to be advertised to other BGP peers.
529