D-Link DXS-3600-16S Manual page 284

Example
DXS-3600-32S#show ip igmp snooping groups vlan 1
IGMP Snooping Connected Group Membership:
VLAN ID Group address
------- ---------------
1 232.0.0.1
1 232.0.0.1
Total entries: 2
DXS-3600-32S#
Example
DXS-3600-32S#show ip igmp snooping groups 230.1.1.1
IGMP Snooping Connected Group Membership:
VLAN ID Group address
------- ---------------
1 230.1.1.1
Total entries: 1
DXS-3600-32S#
Display Parameters
VLAN ID
Group address
FM
Source address
Exp
-
Interface
24-14 show ip igmp snooping static-group
This command is used to display the statically configured IGMP groups.
show ip igmp snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows IGMP Snooping group information on VLAN 1.
Source address
---------------
192.168.1.11
192.168.1.12
This example shows IGMP Snooping group information for specific group 230.1.1.1.
Source address
---------------
14.1.1.11
Description
Displays the VLAN ID.
Displays the Group IP address.
Group filter mode. "EX" means exclude and "IN" means include.
Displays the Source IP address.
The expiring time of this group.
This group is auto created by protocol.
The physic interface or port-channel which learned this group.
Specifies the group IP address you want to display. If no group address specified, all
static IGMP group information will be displayed.
Specifies the VLAN ID. Display the specified VLAN information.
None.
Privileged EXEC Mode.
Level: 3
This command is used to display IGMP snooping static group information. If no
parameter is specified, this command will display IGMP snooping static group
information on all VLANs.
FM Exp(sec) Interface
-- -------- ---------
IN 257 1/0/21
IN 257 1/0/21
FM Exp(sec) Interface
-- -------- ---------
EX 258 1/0/1
276