Counter Commands - D-Link DXS-3600-16S Manual

Counter Commands

10-1 clear counters
This command is used to clear counters for a specific port interface or all port interfaces.
clear counters [INTERFACE-ID]
Parameters
INTERFACE-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clear counters
DXS-3600-32S(config)#
10-2 show interfaces counters
This command is used to display the interfaces' counters.
show interfaces [INTERFACE-ID] counters
Parameters
INTERFACE-ID
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the interface ID. If no interface is specified, all counters on
applicable interfaces (physical ports) will be cleared.
None.
Privileged EXEC Mode.
Level: 12
For now, only physical port counters are provided.
This example shows how to clear counters of all interfaces.
(Optional) Specifies the interface ID. If no interface is specified, all counters on
applicable interfaces (physical ports) will be display.
None.
EXEC Mode.
Level: 12
If no interface is specified, the system will display all existing interfaces.
187