D-Link DXS-3600-16S Manual page 147

Parameters
vrf VRF-NAME
IP-ADDRESS
advertised-routes
received prefix-filter
received-routes
routes
statistics
all
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp neighbors
BGP neighbor: 10.1.1.1 (Internal Peer)
-------------------------------------------------------------------
Session State
Remote AS
Remote Router ID
BGP State
Hold Time
Keepalive Interval
Advertisement Interval
EBGP Multihop
Weight
Address Family IPv4 Unicast
IPv4 Unicast
Next Hop Self
Remove Private As
AllowAS In
Soft Reconfiguration Inbound
Send Community
Default Originate
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode
Receive Mode
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
Address Family VPNv4 Unicast
VPNv4 Unicast
Next Hop Self
AllowAS In
Send Community
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode
Receive Mode
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
(Optional) Specifies the IP address of a neighbor. If this argument is omitted, all
neighbors are displayed.
(Optional) Displays the routes advertised to a BGP neighbor.
(Optional) Displays the prefix-list received from the specified neighbor.
(Optional) Displays the received routes from neighbor. To display all the received
routes from the neighbor, configure the BGP soft reconfigure first.
(Optional) Displays all accepted routes learned from neighbors.
(Optional) Displays the statistical information of BGP speaker.
(Optional) Displays information of all BGP neighbors
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to display the information of the neighbor. The information may
be the dynamic parameters configured to the neighbor, routers received from or sent
to the neighbor, ORF filter received from the neighbor and the statistics information
about the neighbor.
This example shows how to display all the neighbors.
: Enabled
: 1
: 0.0.0.0
: Connect
: 180 Seconds
: 60 Seconds
: 5 Seconds
: 255
: 0
: None
: Disabled
: Disabled
: Disabled
: Disabled
: None
: Disabled
: Disabled
: Disabled
: 12000
: 75
: Disabled
: None
: Disabled
: Disabled
: None
: Disabled
: Disabled
: 12000
: 75
: Disabled
139