D-Link DXS-3600-16S Manual page 468

Example
DXS-3600-32S#show ip pim neighbor
Neighbor Address Interface
---------------- ------------
10.2.0.2 vlan1
Total Entries: 1
DXS-3600-32S#
Display Parameters
Neighbor Address
Interface
Uptime
Expires
Mode
47-15 show ip pim sparse-mode bsr-router
This command is used to display PIM-SM bootstrap router information.
show ip pim sparse-mode bsr-router
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip pim sparse-mode bsr-router
PIMv2 Bootstrap information
This System is the Bootstrap Router (BSR)
BSR Address: 10.90.90.90
BSR Priority: 100, Hash mask length: 30
Role: Candidate BSR
Next bootstrap message in 00:00:17
state: Elected BSR
Candidate RP: 10.90.90.90(vlan1)
Group acl: crp-system
Candidate RP: 172.16.11.254(vlan2)
Group acl: crp-acl
Candidate RP priority : 192
Holdtime 150 seconds
Advertisement interval 60 seconds
Next Cand_RP_advertisement in 00:00:15
DXS-3600-32S#
Display Parameters
BSR Address
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example displays all the interface's neighbor information.
Uptime
----------
00:00:32
Description
Specify the neighbor's address.
Specify the name of interface binding by the neighbor.
Length of time (in hours, minutes, and seconds) that the router has known about this
neighbor.
Time (in hours, minutes, and seconds) this neighbor expires.
The mode of this interface. To configure this value, use command ip pim.
None.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to show BSR information.
This example displays PIM BSR information.
Priority: 100 Hash mask lenth: 30
Description
IP address of the bootstrap router.
Expires Mode
---------- -----
00:01:26 SM
460