Show Account - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Example usage:
To configure the user password of 'dlink' account:

show account

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display user account information:
show session
Purpose
Syntax
Description
Parameters
13
DGS3100# config account dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS3100#
To display information about all user accounts on the Switch.
show account
The show account command displays all account usernames and
their access levels created on the Switch. Up to 31 user accounts
can exist on the Switch at one time.
None.
None.
DGS3100# show account
Username Access Level
------------------------ --------------------
Dlink
admin
Total Entries: 2
DGS3100#
To display information about currently logged-in users.
show session
The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
includes the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user's IP address, the user's access Level (1=user, 15=admin), and
the account name on the Switch.
None.
User
Admin