Show Rmon History - D-Link DXS-3600-16S Manual

Usage Guideline
Example
DXS-3600-32S#show rmon statistics
Statistics : 1
Data Source : 1.3.6.1.2.1.2.2.1.1.1
DropEvents : 0
Octets : 0
Pkts : 0
BroadcastPkts : 0
MulticastPkts : 0
CRCAlignErrors : 0
UndersizePkts : 0
OversizePkts : 0
Fragments : 0
Jabbers : 0
Collisions : 0
Pkts64Octets : 0
Pkts65to127Octets : 0
Pkts128to255Octets : 0
Pkts256to511Octets : 0
Pkts512to1023Octets : 0
Pkts1024to1518Octets : 0
Owner : monitor
Statistics : 2
Data Source : 1.3.6.1.2.1.2.2.1.1.2
DropEvents : 0
Octets : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All

51-6 show rmon history

This command is used to display history control and history data information.
show rmon history
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Statistics is the first group in RMON. It measures the basic statistics information of
each monitored subnet. At present, only the Ethernet interfaces of network devices
can be monitored and measured. This group contains a statistics of Ethernet,
including the discarded packets, broadcast packets, CRC errors, size block,
conflicts, etc.
This example shows how to display the RMON statistics information.
None.
None.
Privileged EXEC Mode.
Level: 3
History is the second group in RMON. It collects the network statistics information
regularly and keeps them for processing later.
This group contains two subgroups:
1. The subgroup History Control is used to set such control information as
sampling interval and sampling data source.
2. The subgroup Ethernet History provides history data about the network
section traffic, error messages, broadcast packets, utilization, number of
collision and other statistics for the administrator.
505