Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# router rip
DXS-3600-32S(config-router)# address-family ipv4 vrf VPN-A
DXS-3600-32S(config-router-af)#
52-18 exit address-family
This command is used to exit the address family configuration mode.
exit address-family
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# router rip
DXS-3600-32S(config-router)# address-family ipv4 vrf VPN-A
DXS-3600-32S(config-router-af)#network 10.1.1.0
DXS-3600-32S(config-router-af)#exit address-family
DXS-3600-32S(config-router)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to create a new RIP instance in VRF VPN-A.
None.
None.
Address Family Configuration Mode
Level: 8. (EI Mode Only Command)
This command is used to exit the address family configuration mode.
This example show how to exit the address family configuration mode:
522