D-Link DXS-3600-16S Manual page 606

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#time-range time1
DXS-3600-32S(config-time-range)#periodic sun-tue 1:00 to 2:00
Success
DXS-3600-32S(config-time-range)#
63-3 show time-range
This command is used to display all existing time ranges.
show time-range
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show time-range
Time Range Information
-------------------------
Range Name : time1
Weekdays : Sun,Mon,Tue
Start Time : 01:00
End Time : 02:00
Total Entries :1
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to configure a new time range called time1.
None.
None.
Global Configuration Mode.
Level: 4
None.
This example shows how to display all existing time range.
598