Show Mpls Ldp Parameter - D-Link DXS-3600-16S Manual

LSP: 6
Type: Egress
FEC: VC11/192.1.1.1
In Label: 200
Total Entries: 6
DXS-3600-32S#
Example
DXS-3600-32S#show mpls forwarding-table ftn
FEC Out Label
--------------- ----------
201.10.10.0/24 500
202.1.1.0/24 600
VC11/192.1.1.1 100/70
Total Entries: 3
DXS-3600-32S#
Example
DXS-3600-32S#show mpls forwarding-table ilm
FEC
------------------
201.1.1.0/24
172.1.1.1/32
VC11/192.1.1.1
Total Entries: 3
DXS-3600-32S#

38-31 show mpls ldp parameter

This command is used to display LDP global information.
show mpls ldp parameter
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Status: Up
Owner: LDP
Out Label: Pop
This example shows how to display FTN information.
Next Hop
----------
172.10.1.1
172.10.1.1
172.18.1.1
This example shows how to display ILM information.
In Label Out Label
---------- ----------
20 30
50 -
200 -
None.
None.
EXEC mode.
Level: 3.
This command is used to display LDP global information.
Out Interface
-------------
VLAN 10
VLAN 10
VLAN 10
Out Interface Next Hop
------------- -------------
VLAN 10 172.18.1.1
VLAN 10 172.18.1.1
- -
361