Show Arp Counter; Show Arp Timeout - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show arp static
ARP timeout is 20 minutes.
Interface IP Address
------------- ---------------
System 10.1.1.5
System 10.1.1.8
Total Entries: 2
DXS-3600-32S#
Example
DXS-3600-32S#show arp complete
ARP timeout is 20 minutes.
Interface IP Address
------------- ---------------
System 10.1.1.9
Total Entries: 1
DXS-3600-32S#

4-5 show arp counter

This command is used to display the number of ARP entries in the ARP cache table.
show arp counter [vrf <string 1-12>]
Parameters
vrf
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show arp counter
Total ARP Entry Counter: 3
DXS-3600-32S#

4-6 show arp timeout

This command is used to display the aging time of a dynamic ARP entry on the switch.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the ARP cache table containing static types.
MAC Address
-----------------
00-12-21-12-21-18
00-12-21-12-21-48
This example shows how to display the ARP cache table containing all the
completed entries.
MAC Address
-----------------
00-05-5D-A5-32-3F
Specifies the VRF that the IP reside in. If no VRF name is specified, the global
instance will be used.
None.
Privileged Mode.
Level: 3
Use this command to display the number of ARP entries in the ARP cache table.
This example shows how to display the number of ARP entries in the ARP cache
table.
Type
---------------
Static
Static
Type
---------------
Dynamic
44