D-Link DXS-3600-16S Manual page 413

Example
DXS-3600-32S#show ip ospf neighbor 2.2.2.2
Neighbor ID: 2.2.2.2
Neighbor Options: 2
Neighbor State: Full
DXS-3600-32S#
Display Parameters
IP Address of Neighbor
Router ID of Neighbor
Neighbor Priority
Neighbor State
Neighbor Options
State Changes
40-29 show ip ospf virtual-link
This command is used to show information about OSPF virtual links.
show ip ospf virtual-link [area-id neighbor-id] [vrf vrf-name]
Parameters
area-id
neighbor-id
vrf vrf-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip ospf virtual-link
Virtual Interface Configuration
Transit Virtual
Area ID Neighbor Router Interval Interval
--------------- --------------- -------- -------- -------------- ------
4.4.4.4 1.1.1.1
4.4.4.4 6.6.6.6
DXS-3600-32S#
Display Parameters
Transit Area ID
Virtual Neighbor Router
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows detailed information about neighbor with IP 10.1.1.2.
IP Address: 10.1.1.2
Neighbor Priority: 1
State Changes: 6 times
Description
Interface address of the neighbor router.
Router ID of the neighbor router.
Priority of the neighbor router.
State machine of adjacency.
Option in the Hello packet sent by neighbor router.
The times that neighbor state has changed.
(Optional) Specifies the area ID which the virtual link belongs to.
(Optional) Specifies the router ID of peer of virtual link.
(Optional) Specifies to show virtual link information about the OSPF VRF instance.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
Use this command to show virtual link information. If area-id and neighbor-id is
specified, only the virtual link with the same area ID and neighbor ID will be
displayed.
This example shows information about virtual link.
Hello Dead
10 60
10 250
Description
The non-backbone area the two endpoints of virtual link have in common.
Router ID of the other endpoint of the virtual link.
Authentication Link
Status
MD5 Up
Simple Down
405