D-Link DXS-3600-16S Manual page 307

Parameters
IFNAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip multicast interface
Interface Name IP Address
--------------- ------------------ ------------------
vlan1 10.90.90.90/8
vlan2 1.0.90.3/8
vlan3 2.4.2.2/8
vlan4 3.4.4.3/8
Total Entries: 4
DXS-3600-32S#
Example
DXS-3600-32S#show ip multicast interface vlan1
Interface Name IP Address
--------------- ---------------
vlan1 1.0.90.3/8
Total Entries: 1
DXS-3600-32S#
Display Parameters
Interface Name
IP Address
Multicast Routing
29-6 show ip multicast-routing
This command is used to display IP multicast routing global state.
show ip multicast-routing
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the interface name.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to display the basic multicast interface information, if no
parameter is specified, this command will display information for all interfaces.
This example shows how to display all multicast interface information on the whole
system.
Multicast Routing
PIM-SM
DVMRP
PIM-DM
N/A
This example shows how to display multicast interface information on interface
'vlan1'.
Multicast Routing
------------------
DVMRP
Description
Name of the interface.
IP address of the interface
The multicast routing protocol running on the interface. N/A means no any multicast
routing protocol is active on the interface.
None.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to display the IP multicast routing global state.
299