D-Link DXS-3600-16S Manual page 202

Example
DXS-3600-32S#show error-log
# debug log: 1
# firmware version: 1.10.011
# level: CPU exception
# clock: 8337400 ms
# time : 2000-01-19 03:19:42
====================== SOFTWARE FATAL ERROR =======================
Invalid mutex handle : 806D6480
Current TASK : bcmARL.0
------------------------- TASK STACKTRACE ------------------------
->802ACE98
->8018C814
->8028FF44
->8028352C
->801D703C
->8013B8A4
->802AE754
->802A5E0C
->802A5D6C
**************************************************************************
# debug log: 2
# level: fatal
12-7 clear error-log
This command is used to clear error log information.
clear error-log
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clear error-log
DXS-3600-32S(config)#
12-8 show error-reboot
This command is used to show the state of the error-reboot option.
show error-reboot
Parameters
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to show error log information.
<The Output contunues>
None.
None.
Global Configuration Mode.
Level: 15
The user can use the clear error-log command to clear the error log information.
This example shows how to clear the error log information.
None.
None.
EXEC Mode.
Level: 15
194