D-Link DXS-3600-16S Manual page 243

-
recommend
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ets interface tenGigabitEthernet 1/0/1
Interface Id:
ETS Willing:
Max Traffic Classes:
Admin Traffic Class Setting:
CoSMapped CoSs
Queue ID (Priorities)
---------------------
00,1,2,3,4,5,6,7
1
2
3
4
5
6
7
Operational Traffic Class Setting:
CoS Mapped CoSs
Queue ID (Priorities )
---------------------
00,1,2,3,4,5,6,7
1
2
3
4
5
6
7
!---Output truncated.
DXS-3600-32S#
Display Parameters
Max Traffic Classes
CoS Queue ID
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies a range of interfaces. No space before and after the hyphen.
(Optional) Specifies to display the ETS recommendation information of a given
interface or all interfaces.
None.
EXEC Mode.
Level: 3.
This command displays the ETS settings and status on the specified interface(s). If
you do not specify an interface, the show ets interface command will display the
ETS information for all available interfaces. You can use the keyword recommend to
display recommendation information for the specified interfaces.
This example shows how to display the ETS information on interface 1/0/1.
TenGigabitEthernet 1/0/1
off
8
Scheduler Bandwidth
Type Percentage
--------- ----------
ETS 30
ETS 70
Strict 0
Strict 0
Strict 0
Strict 0
Strict 0
Strict 0
Scheduler Bandwidth
Type Percentage
--------- ----------
ETS 30
ETS 70
Strict 0
Strict 0
Strict 0
Strict 0
Strict 0
Strict 0
Description
The maximum number of Traffic Classes that the switch can support.
The index of traffic class.
235