D-Link DXS-3600-16S Manual page 214

Usage Guideline
Example
DXS-3600-32S#clear ip dhcp binding 192.168.12.100
DXS-3600-32S#
Example
DXS-3600-32S#clear ip dhcp binding *
DXS-3600-32S#
Example
DXS-3600-32S#clear ip dhcp binding vrf vrf1 10.13.2.99
DXS-3600-32S#
14-3 clear ip dhcp conflict
This command is used to clear the DHCP address conflict record.
clear ip dhcp conflict [vrf vrf-name] {* | ip-address}
Parameters
vrf vrf-name
*
ip-address
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command can only clear the automatic DHCP binding, but the manual DHCP
binding can be deleted by the no ip dhcp pool command.
Note the following behavior for the clear ip dhcp binding command:
• If you do not specify the VRF name option and an IP address is specified, it is
assumed that the IP address is an address in the global address space and
will look among all the nonvirtual VRF pools for the specified binding.
• If you do not specify the VRF name option and the * option is specified, it is
assumed that all automatic or on-demand bindings in all VRF and non-VRF
pools are to be deleted.
• If you specify both the VRF name option and the * option, all automatic or on-
demand bindings in the specified pool only will be cleared.
• If you specify the VRF name option and an IP address, the specified binding will
be deleted from the specified pool.
The example below clears the DHCP binding with the IP address 192.168.12.100.
The following example shows how to delete all bindings from all pools:
The following example shows how to delete VRF vrf1 from the DHCP database:
(Optional) Specifies to clear DHCP virtual routing and forwarding (VRF) conflicts.
Specifies to delete all DHCP address conflict records.
Specifies to delete the conflict record of the specified IP addresses.
None.
Privileged Mode.
Level: 2
206