D-Link DXS-3600-16S Manual page 470

Example
DXS-3600-32S#show ip pim sparse-mode interface vlan1 detail
Interface Name: vlan1
Address 10.90.90.90, DR 10.90.90.90
My DR priority is: 1
Hello period 30 seconds, Next hello in 7 seconds
Join/Prune interval 60 seconds
Neighbors:
10.2.0.2
DXS-3600-32S#
Display Parameters
IP Address
Interface
Mode
state
Nbr count
Neighbors
Join/Prune interval
DR
47-17 show ip pim sparse-mode rp mapping
This command is used to display RP mapping information.
show ip pim sparse-mode rp mapping
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows detailed information about the PIM interface 'vlan1'.
Description
The IP Address of the interface displayed.
The name of the interface.
The mode of PIM of this interface, To change mode of PIM, use ip pim command.
The PIM-DM state of this interface.
The number of neighbors connect to this interface.
List address of the neighbors below.
The period join message of PIM-SM if this switch has outgoing for a specified group.
This value is configured by ip pim join-prune-interval.
The DR address of this LAN. To change DR of a LAN, use command ip pim dr-
priority.
None.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
This command is used to display PIM-SM RP mapping information.
462