Show Ip Pim Neighbor - D-Link DXS-3600-16S Manual

Usage Guideline
Example
DXS-3600-32S#show ip pim dense-mode interface
IP Address Interface
---------------- ------------ ----- -------- ----------
10.90.90.90 vlan1
Total Entries: 1
DXS-3600-32S#
Example
DXS-3600-32S#show ip pim dense-mode interface vlan1 detail
Interface Name: vlan1
Address 10.90.90.90, DR 10.90.90.90
Hello period 30 seconds, Next hello in 29 seconds
Neighbor:
10.2.0.2
10.2.0.5
DXS-3600-32S#
Display Parameters
IP Address
Interface
Mode
state
Nbr count
Neighbor
DR

47-14 show ip pim neighbor

This command is used to display PIM neighbor information.
show ip pim neighbor [IFNAME]
Parameters
IFNAME
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command displays PIM-DM configuration information.
This example shows how to display the information of all PIM-DM interfaces.
Mode state
DM Enabled
This example shows how to display the detailed information of PIM-DM interface
'vlan1'.
Description
The IP Address of the interface displayed.
The name of the interface.
The mode of PIM of this interface, To change mode of PIM, use the ip pim
command.
The PIM-DM state of this interface.
The numbers of neighbors connected to this interface in the LAN.
The address of the neighbors.
The DR address of this LAN.
Specifies the interface to display the neighbor. If no IFNAME specified, all interface's
neighbor would be displayed.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
Use this command to display the neighbor information of PIM. Both PIM-SM and
PIM-DM neighbor would be displayed.
Nbr count
0
459