Cpu Commands - D-Link DXS-3600-16S Manual

CPU Commands

11-1 show cpu
This command is used to show the CPU utilization information.
show cpu
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show cpu
CPU Utilization
-------------------------------------------------------------------------------
Five seconds - 34 %
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
None.
Privileged EXEC Mode.
Level: 15
Use this command to show the system CPU utilization information in 5sec, 1 min and
5 min.
This example shows how to show the CPU utilization information.
One minute - 35 % Five minutes -
190
35 %