Show Utilization - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show interfaces counters
Interface : 1/0/1
Input Rate : 0 bytes/sec, 0 packets/sec
Output Rate : 0 bytes/sec, 0 packets/sec
InOctets : 0
InUcastPkts : 0
InMulticastPkts : 0
InBroadcastPkts : 0
OutOctets : 0
OutUcastPkts : 0
OutMulticastPkts : 0
OutBroadcastPkts : 0
Undersize packets : 0
Oversize packets : 0
Collisions : 0
Fragments : 0
Jabbers : 0
CRC Alignment Errors : 0
AlignmentErrors : 0
FCSErrors : 0
Dropped Packet Events (Due to lack of resources) : 0
Packets Received Of Length (In Octets) :
64: 0, 65-127: 0, 128-255: 0,
256-511: 0, 512-1023: 0, 1024-1518: 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All

10-3 show utilization

This command is used to display the interface utilization.
show utilization ports
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display counters of all interfaces.
None.
None.
EXEC Mode.
Level: 12
When specified to display ports utilization, the system will display all existed
interfaces.
188