D-Link DXS-3600-16S Manual page 216

no dns-server
Parameters
ip-address
ip-address2 ip-address3
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp pool pool1
DXS-3600-32S(dhcp-config)#dns-server 192.168.12.3
DXS-3600-32S(dhcp-config)#
14-6 domain-name
This command is used to define the suffix domain name of the DHCP client in the DHPC address pool configuration
mode. The no form of this command can be used to delete the suffix domain name.
domain-name domain-name
no domain-name
Parameters
domain-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp pool pool1
DXS-3600-32S(dhcp-config)#domain-name domain.com
DXS-3600-32S(dhcp-config)#
14-7 hardware-address
This command is used to define the hardware address of the DHCP client in the DHPC address pool configuration
mode. The no form of this command can be used to delete the definition of the hardware address.
hardware-address hardware-address type
no hardware-address
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to define the IP address of the DNS server. At least one IP address should
be configured.
(Optional) Up to 3 DNS servers can be configured.
No DNS server is defined by default.
DHCP Address Pool Configuration Mode.
Level: 8
Define the DNS server for the DHCP client.
This example shows how to specify the DNS server 192.168.12.3 for the DHCP
client.
Specifies to define the suffix domain name string of the DHCP client.
No suffix domain name by default.
DHCP Address Pool Configuration Mode.
Level: 8
After the DHCP client obtains a specified suffix domain name, it can access a host
with the same suffix domain name by the host name directly.
This example shows how to define the suffix domain name 'domain.com' for the
DHCP client.
208