Show Vrrp - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#vrrp 7 timers advertise 10
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#no vrrp 7 timers advertise
DXS-3600-32S(config-if)#

69-7 show vrrp

This command is used to display the VRRP status.
show vrrp [interface ipif_name [group vrid]] [brief]
Parameters
interface ipif_name
vrid
brief
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show vrrp brief
Interface Grp Pri Own Pre State
vlan1 1
vlan1 2
vlan2 1
DXS-3600-32S#
Example
DXS-3600-32S#show vrrp interface vlan2 brief
Interface Grp Pri Own Pre State
vlan2 1
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to configure the router to send advertisements for VRRP 7
every 10 seconds on interface vlan1.
This example shows how to configure the advertisement interval to use the default
settings.
Displays information about the virtual routers that belong to specified interface.
Displays the detailed information about the specified virtual router. The valid range is
from 1 to 255.
Displays brief information.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
Use this command to show the VRRP related setting and status.
This example shows brief information about all virtual routers.
255 Y Y Master
100 Y Master
50 Y Init
This example shows brief information about the virtual routers belong to interface
'vlan2'.
50 Y Init
Master addr Group addr
10.1.1.1 10.1.1.1
10.1.1.1 10.1.1.101
100.1.1.1 100.1.1.100
Master addr Group addr
100.1.1.1 100.1.1.100
636