Show Mpls Ldp Neighbor - D-Link DXS-3600-16S Manual

show mpls ldp discovery
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mpls ldp discovery
Local LDP Identifier: 10.1.1.1:0
Discovery Sources:
Interfaces:
VLAN 10 (ldp): xmit/recv
LDP Id: 172.23.0.77:0
VLAN 20 (ldp): xmit/recv
LDP Id: 192.18.0.15:0
Targeted Hellos:
10.1.1.1 -> 10.133.0.33 (ldp): active, xmit/recv
LDP Id: 10.133.0.33:0
10.1.1.1 -> 172.18.30.2 (ldp): passive, xmit/recv
LDP Id: 172.18.30.2:0
Total entries: 4
DXS-3600-32S#

38-35 show mpls ldp neighbor

This command is used to display LDP neighbor information.
show mpls ldp neighbor [IP-ADDRESS]
Parameters
IP-ADDRESS
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
None.
EXEC Mode.
Level: 3.
This command is used to display LDP peer information.
This example shows how to display LDP peer information.
Specifies the IP address used as the peer LSR ID. If not specified, display all
neighbors.
None.
EXEC Mode.
Level: 3.
This command is used to display LDP neighbor information.
364