D-Link DXS-3600-16S Manual page 237

show hosts [vrf <string 1-12>]
Parameters
vrf <string 1-12>
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show hosts
Name servers are: 192.168.5.134
Static Host Name Table
Host Name
-------------------------------------
www.abc.com
Total Static Entries:
Dynamic Host Name Table
Host Name
-------------------------------------
www.yes.com
Total Dynamic Entries: 1
DXS-3600-32S#
17-6 ip dns server
This command is used to control if the switch can use the domain name for other dns clients which are connected to it.
If the DNS server state is enabled, when it recevies a DNS query, it will according to its DNS cache table or query an
upper DNS server to respond to the client. Us the no form of this command to disable this function.
ip dns server
no ip dns server
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dns server
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the VRF that the host reside in. If no VRF name specified, the global
instance will be used.
None.
Privileged Mode.
Level: 2
Show the DNS related configuration information.
This example shows how to show the DNS related configuration information.
IP Address
---------------
192.168.5.243
1
IP Address
--------------- ---------
10.0.0.88
None.
By default, this option is disabled.
Global Configuration Mode.
Level: 8
This command enables the domain name server function.
This example shows how to enable the DNS domain name server function.
TTL
1334 minutes
229