D-Link DXS-3600-16S Manual page 589

Parameters
privilege-level
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S>enable 15
DXS-3600-32S#
59-8 disable
This command is used to leave a privilege level.
disable [privilege-level]
Parameters
privilege-level
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#disable
DXS-3600-32S>
59-9 enable password
This command is used to create a privilege level password.
enable password [level privilege-level] {password | encrypted encrypted-password}
no enable password [level privilege-level]
Parameters
level privilege-level
password
encrypted
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the privilege level used. If this value is not specified, then the default
privilege level value will be used.
The default privilege level is 15.
EXEC Mode.
Level: 1
When a user finds that some commands cannot be executed because the current
level is lower than command's required level, the user can use this command to login
to a higher level. If the privilege level have a password configured, the user needs to
input the required password before access to the higher privilege level will be given.
If the user inputs the incorrect password three times, the switch will stop requesting
the user to input the password and return to current privilege level.
This example shows how to enable the privilege level of 15.
Specifies the privilege level used. If this value is not specified, then the default
privilege level value will be used.
The default privilege level is 1.
EXEC Mode.
Level: 1
None.
This example shows how to leave the privilege level.
Specifies the privilege level used. If not specified, the privilege level will set to 15.
Specifies that a plain text password will be used.
Specifies that the password will be encrypted.
581