D-Link DXS-3600-16S Manual page 300

clear ip prefix-list counter {PREFIX-LIST-NAME [NETWORK-ADDRESS] | all}
Parameters
PREFIX-LIST-NAME
NETWORK-ADDRESS
all
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#clear ip prefix-list counter all
DXS-3600-32S#
28-4 show ip prefix-list
This command is used to show the information about IP prefix list.
show ip prefix-list [PREFIX-LIST-NAME]
Parameters
PREFIX-LIST-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip prefix-list my_pref
IP Prefix List: my_pref
Description: allow routes from peer A
Total Rule Number:2
Sequence 5 Permit 10.0.0.0/8 le 24
Sequence 10 Deny
DXS-3600-32S#
Display Parameters
IP Prefix List
Total Rule number
Total IP Prefix Number
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the name of the IP prefix list. It can accept up to 16 characters. The syntax
is general string that does not allow space.
(Optional) Specifies the network entry of IP prefix list.
Clear the hit count of all IP prefix lists
None.
Privileged EXEC Mode.
Level: 8
The hit count is the value that indicates the times of an prefix list entry is matched.
This example shows how to clear the counter of all the IP prefix-lists.
(Optional) Displays information of the specified IP prefix list.
None.
Privileged EXEC Mode.
Level: 3
If no parameter is specified, that all IP prefix lists' information will be displayed.
This example shows the information of IP prefix list "my_pref":
12.0.0.0/12 le 24 ge 20
Description
The name of IP prefix list. It is specified with the command ip prefix-list.
Rules number of the IP prefix list.
Total number of all IP prefix lists.
292