D-Link DXS-3600-16S Manual page 286

Usage Guideline
Example
DXS-3600-32S#show ip igmp snooping mrouter
VLAN ID Interface
-----------------------------------
1 1/0/1 (static)
2 1/0/4 (static)
1/0/9 (dynamic)
DXS-3600-32S#
Example
DXS-3600-32S#show ip igmp snooping mrouter vlan 1
VLAN ID Interface
-----------------------------------
1 1/0/1 (static)
DXS-3600-32S#
Display Parameters
static
forbidden
dynamic
24-16 show ip igmp snooping forwarding-table
This command is used to display IGMP Snooping forwarding information.
show ip igmp snooping forwarding-table [vlan VLAN-ID]
Parameters
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command is used to display IGMP Snooping multicast router interface
information. If no parameter is specified, this command will display IGMP Snooping
multicast router interface information on all VLANs.
This example shows how to display the IGMP Snooping multicast router interface
information of all VLANs.
This example shows how to display the IGMP Snooping multicast router interface
information on VLAN 1.
Description
Static mrouter interface information, which is configured by command ip igmp
snooping vlan mrouter.
Forbidden mrouter interface information, which is configured by command ip igmp
snooping vlan mrouter forbidden.
Dynamically learned mrouter interface information.
Specifies the VLAN ID. Display the information on the specified VLAN. The range is
1 to 4094.
None.
Privileged EXEC Mode.
Level: 3
This command is used to display IGMP Snooping forwarding information. If no
parameter is specified, this command will display IGMP Snooping forwarding
information on all VLANs.
278