Avaya S8700 Maintenance Manual page 2203

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

SNI-BD (SNI Circuit Pack)

Table 8-581. TEST #767 Packet Neighbor Link Test — Continued

Description / Recommendation

The SNI circuit pack cannot communicate with the SNI in slot 20 over the

packet path.

1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 20.

2. Using the display errors command, check the error log for other SNI

3. Replace the SNI being tested.

4. Replace the SNI in slot 20.

Use the display errors command to find any SNI-BD errors and use the

display alarms command to determine whether the errors have on-board

alarms. Then, follow the associated repair procedures for the SNI-BD as

described in the Maintenance manual.

circuit packs with SNI-PEER error type 3841. If other SNI circuit packs

have SNI-PEER error type 3841 errors, replace the SNI in slot 20.

Replacing an SNI may be service interrupting. See

Pack)'' on page 8-1429

for the procedure for replacing an SNI.

If other SNI circuit packs do not have SNI-PEER error type 3841 errors,

the problem could be at either of the peer SNI boards. It is arbitrary as to

which SNI is replaced first.

''SNI-BD (SNI Circuit

Continued on next page

Issue 1 May 2002

Troubleshooting