Avaya S8700 Maintenance Manual page 2222

Maintenance-Object Repair Procedures
Error Log Entries and Test to Clear Values
Table 8-586. Stratum-3 Clock Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1(a) Any Stratum-3 Clock
Alarm Query (#649
18(b) 0 disable sync
257(c) Any Stratum-3 Clock
Alarm Query (#649)
513(d) Any Stratum-3 Clock
Alarm Query (#649
769(e) Any Stratum-3 Clock
Alarm Query (#649)
1025(f) Any Stratum-3 Clock
Alarm Query (#649)
1281(g) Any Stratum-3 Clock
Alarm Query (#649)
1537(i) none
1793(j) none
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. This error type corresponds to FAIL code 1 of the Stratum-3 Clock Alarm
Query test (#649): either reference A failed or the CI card A failed.
b. This error indicates that Synchronization Maintenance has been disabled
via the disable synchronization-switch command. Execute the enable
synchronization-switch command to enable Synchronization
Maintenance reference switching and to resolve this alarm.
c. This error type corresponds to FAIL code 2 of the Stratum-3 Clock Alarm
Query test (#649): one power supply failed.
d. This error type corresponds to FAIL code 4 of the Stratum-3 Clock Alarm
Query test (#649): one clock unit failed.
e. This error type corresponds to FAIL code 8 of the Stratum-3 Clock Alarm
Query test (#649): either reference B failed or the CI card B failed.
8-1500 Issue 1 May 2002
Alarm On/Off
Level Board
Any Any
MINOR OFF
WARNING OFF
MINOR OFF
MINOR ON
MINOR ON
MINOR ON
MAJOR(h)
MINOR ON
/MAJOR(h)
MINOR ON
MAJOR(h)
MINOR ON
MAJOR(h)
Test to Clear Value
test synchronization r 4
test synchronization r 4
enable sync
test synchronization r 4
test synchronization r 4
test synchronization r 4
test synchronization r 4
test synchronization r 4
555-233-143