16. Reset the PCM w i t h the HDS.
17. Do the PCM idle learn procedure (see page 11-340).
18. Do the VTEC TEST in the INSPECTION MENU w i t h
the HDS.
19. Check for Temporary DTCs or DTCs with the HDS.
Are any Temporary
DTCs
or DTCs
indicated?
Y E S - l f DTC P0A14 and/or P0AB6* is indicated,
check for poor connections or loose terminals at
the engine mount control unit and the active
control engine mount (ACM) actuator, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated DTCs
troubleshooting.
NO—Troubleshooting is c o m p l e t e . •