Honda ACCORD HYBRID 2005 Service Manual page 482

Hide thumbs Also See for ACCORD HYBRID 2005:
Table of Contents

Advertisement

Electronic Throttle Control System
D T C T r o u b l e s h o o t i n g ( c o n t ' d )
16. Replace the APP sensor (see page 11-265).
17. Reconnect all connectors.
18. T u r n the ignition switch ON (II).
19. Reset the PCM w i t h the HDS.
20. Do the PCM idle learn procedure (see page 11-340).
2 1 . Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary
DTCs
or DTCs
indicated?
YES—If DTC P2122 is indicated, check for poor
connections or loose terminals at APP sensor A and
the PCM, then go to step 1. If any other T e m p o r a r y
DTCs or DTCs are indicated, go to the indicated
D T C s t r o u b l e s h o o t i n g .
N O — T r o u b l e s h o o t i n g is c o m p l e t e . •
22. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
23. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary
DTCs
or DTCs
indicated?
YES—If DTC P2122 is indicated, check for poor
connections or loose t e r m i n a l s at APP sensor A and
the PCM, then go to step 1. If any other T e m p o r a r y
DTCs or DTCs are indicated, go to the indicated
D T C s troubleshooting.
NO—If the PCM was updated, t r o u b l e s h o o t i n g is
complete. If the PCM was substituted, replace the
original PCM (see page 11-219). •
11-242

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents