Honda ACCORD HYBRID 2005 Service Manual page 457

C M P S e n s o r R e p l a c e m e n t
1. Set the No. 1 piston at top dead center (see step 4
on page 6-16).
2. Remove the upper covers f r o m the engine (see step
17 on page 6-18).
3. To hold the t i m i n g belt adjuster in its current
position, thread in the battery clamp bolt hand-tight
(see step 19 on page 6-18).
4. Loosen the idler pulley bolt about five or six turns,
then remove the t i m i n g belt f r o m the front
camshaft pulley (see step 22 on page 6-19).
5. Remove the front camshaft pulley (A).
90 N m (9.2 k g f m , 67 Ibf-ft)
A p p l y engine oil to the bolt threads.
6. Disconnect the CMP sensor connector (B), then
remove the back cover (C).
7. Remove the CMP sensor (A) f r o m the back cover.
8. Install the sensor in the reverse order of removal.
Reinstall the t i m i n g belt (see page 6-16) and other
removed parts.
11-217